Automation Forced Convection Tempering Glass Bending Kiln
1.Bending tempering section in this furnace adopts longitudinal bending structure (bending direction of the glass is same as its moving direction) and steel driving rollers.
2.B bending system consists of several bending devices, each of which can bend by itself and has an indiviaul fine adjusting device.
3.With precise screw pairs in bending mechanism and German servo control system, the end products are of high quality.
Glass after pretreatment is placed in turn onto the loading table according to process requirements. Press buttons at the loading table to transfer the glass to the heating furnace batch-by-batch.
JetConvection heating furnace
The internationally leading JetConvection heating technology is adopted to heat the glass to the tempering temperature in a rapid and uniform manner, which is particularly suitable for Low-E glass and high-quality glass processing.
After leaving the heating furnace, glass is transferred to the tempering section, where the hot glass is tempered and cooled gradually under fast cooling action of the set air pressure and air volume.
The human-machine interface(HMI)is the information exchange interface between the operator and the glass tempering furnace. With HMI, operators can not only call and modify the process parameters, but also observe the running status, data, fault alarm and other information of the equipment.
Blowers are connected to the tempering furnace through blowing systems, which provide air volume and air pressure for the equipment to achieve glass tempering and cooling.
Electrical control system
The electrical control system controls and coordinates the movement of each functional section of the equipment and the heating process of glass within the heating furnace.
|Automation Forced Convection Tempering Glass Bending Kiln|
|Model||Max. Dimension (mm)||Min. Dimension (mm)||Glass Thickness (mm)||Min. radius (mm)||Productivity (Loads/Hour)||Installing Capacity (kVA)|